Costing over $30, the Kanger Toptank Mini is almost as expensive as some box mods. Its price is comparable to many sub ohm tanks in this market, however, and since I am referring specifically to high quality tanks, there is good reason for the higher pricing. Vapers know what they are getting from a brand like Kangertech. This is no cheap accessory made using sub-standard glass or metal alloys. It’s a toptank.
Kanger Toptank Mini Summary
I will dig more deeply in a second. Just to pique your interest, here are some specific features of this new tank. It is a top-fill, 22 mm-wide accessory (45 mm tall) with a 4-ml capacity and stainless steel coils made using organic cotton.
The tank is Pyrex and hardware is made from stainless steel. There are two airflow valves in the base cap and a removable drip tip. Contact with your device is provided by a brass-plated pin and threading connects to 510 devices.
Buy Online: http://www.directvapor.com
Toptank Mini in Depth
That was quick, but we need to draw out the details. Firstly, a width of 22 mm is suitable for regular-sized mods like a 70W KBOX or a Sigelei 90W; the Tesla 100W and 200W VaporShark DNA. You could attach the Mini to a 22-mm mechanical mod too, but I think you will be looking for a colored finish if you go that route. There is a Toptank with the stainless finish but also several colors. They match Kanger mods in red, black, white, and more.
A 4-ml tank isn’t huge but the Toptank gets its name from the fact you can refill from the top. The tank could be 1 ml deep and still be more convenient than an RDA, but that would look ridiculous with the amount of hardware included such as a black, wide-bore drip tip and supportive partial-sleeve over the glass. Also, if you buy the black tank with red O-rings, they measure about 1 mm on their own. Your tank would appear to be filled with a macabre red substance.
While Kangertech had their own box mods in mind for the Toptank, they are perfectly content for vapers to attach this sub ohm beauty to anything with 510 threading. That’s just about every sub ohm, high watt box mod commercially available and probably lots of homemade mods too.
Kanger supplies an RBA base: that’s a rebuild deck. Now is your chance to try out coil building. People who master this skill are able to save money: pre-built coil heads cost more. They can also customize coils. With a protected device it’s okay to make mistakes with resistance. A mod won’t fire if resistance is too high or too low.
Organic cotton is essential to the high-temperature vaping experience you are aiming for. High temperature releases any impurities remaining in a material, including cotton grown using pesticides. Kanger helps vapers start a clean trend if they have not already begun using organic cotton.
Buy the Kanger Toptank Mini
When you purchase this tank from a respectable dealer, he will provide you with an authenticity card plus the following parts. You receive two coils: one 0.5-ohm, the other 0.15-ohm, both SSOCC. There is the RBA base for building atomizer coils DIY style.
You also receive a manual and a bag of cotton, ideal for replacing cotton in pre-built coils or to get customers started on DIY coil wrapping. The set comes with 3 screws and a screwdriver. Take a quick look at the price again. It’s not so bad.
Many cheaper sets come with fewer extras, and when you add those an affordable set is not as cheap as you thought, especially if threading wears down rapidly and low-quality glass chips too readily. The Kangertech Toptank Mini has more life in it than a $15 tank.
Available For $29.95 At: http://www.directvapor.com
