The Vengeance, a Council of Vapor sub ohm vaping tank, is ready to make vapor. It is durably constructed with a no-nonsense design in black or silver, plus all of the features a vaper expects from a sub ohm RBA and a few they weren’t expecting.
Vengeful Vaping from Council of Vapor
Choose a mod with wattage variability as high as 100W. At this time, TC coils do not appear to be available although your vapor store owner might have discovered compatible coils from other brands and models. Replacements for the Vengeance sub ohm coils measure 0.2 ohms and are sold in packs of 10.
Fresh Air
The airflow control portion of this tank is extremely customizable. Adjust all four of them for a precise result. There is also airflow near the short, wide, stubby drip tip but these holes cannot be closed off. They are also part of the spit-back prevention design. Airflow at the top dissipates heat as vapor rises to your mouth.
Spit-Back Prevention
Does this ever happen to you: you fill the tank carefully but still get spit-back? That’s not unusual, although sometimes your filling method could be behind such a common problem. The Council of Vapor Vengeance sub ohm tank incorporates a honeycomb guard which prevents that from happening. Council of Vapor provides six holes for the wicks so as to maximize and hasten coil saturation while increasing vapor.
Undeniable Durability
An industrial look and feel has been created by bulking up on hardware which dominates over the glass portion. Although Pyrex is sturdy as far as glass goes, it is the 304 stainless steel top and bottom caps plus the drip tip and internal hardware which combine to create a heavy, almost indestructible appearance.
The Vengeance by Council of Vapor Set
When you order this product from a participating retailer, the box will include an extra tank because, Pyrex or not, glass breaks. You can prevent the need to hastily replace your tube by using extra care when handling this portion and also by not overtightening the connection between tank and caps. A 0.2-ohm coil has been installed already but another is supplied with sub ohm tank. This will function nicely between 30 watts and 100 watts. The set costs about $35 before purchasing extra coils.
Potential Mod Companions
With which mods would the Vengeance suit stylistically and in terms of wattage applications? As long as you run a mod in Variable Watt mode only wherever TC operation is available, an iStick from 30 to 100 watts is suitable.
The Cool Fire IV Plus, SMOK R200, and KBOX 120W are all possibilities. Council of Vapor’s very own Mini Volt 40W mod is another good choice. In terms of color, black and silver match everything, so go ahead and mix a Vengeance with a red or blue mod; pink or white. Create a monochromatic appearance and add a splash of color at the top by applying a beautiful drip tip in place of the short one supplied by COV.
More from Council of Vapor
Their website shows a list of advanced products like the Aris sub ohm tank featuring three 24K gold-plated build posts, airflow, a deep filling well, and a glass drip tip. The Mini Volt is truly adorable at just 56 x 35 x 22 mm with a 5W to 40W range, 1200mAh built in battery, and two-toned exterior providing superior grip.
Buy The Vengeance: http://www.myfreedomsmokes.com
